Crunch GTX 2600 Bedienungshandbuch PDF herunterladen (Seite 27)

GTX4600 - GTX4800

EXAMPLE 3-Channel Mode: 1 x Stereo System & 1 x Mono Subwoofer bridged

INTERCONNECTION

• Connect the RCA lineouts of the headunit with the RCA jacks LINE INPUT of the amplifier with appropriate high-value RCA cables. If a

separate SUB OUT from your headunit is available, use this for the LINE INPUT CH3/4 on the amplifier.

• Connect the speakers with SPEAKER OUTPUT + CH 1 - and + CH 2 - and the subwoofer with the SPEAKER OUTPUT CH3/4

+ BRIDGED - of the amplifier.

• Ensure by any means, that the total impedance load of all speakers per channelpair (CH1 & CH2) is not lower than 2 ohms and the total

impedance load of the subwoofer (CH3 & CH4) is not lower than 4 ohms. Too low impedance cause high temperature and will shut down

the amplifier operation.

INPUT MODE SWITCH

• Attend the regarding notes on page 25.

CROSSOVER SETTINGS CH1/2 (STEREO SYSTEM)

• Attend the regarding notes on page 22.

LEVER CONTROLLER CH1/2 (STEREO SYSTEM)

• Attend the regarding notes on page 22.

BASS BOOST CONTROLLER CH1/2 (STEREO SYSTEM)

• The BASS BOOST controller must be turned to 0 dB position in this interconnecting example .

CROSSOVER SETTINGS CH3/4 (SUBWOOFER )

• Attend the regarding notes on page 23.

LEVER CONTROLLER CH3/4 (SUBWOOFER )

• Attend the regarding notes on page 23.

BASS BOOST CONTROLLER CH3/4 (SUBWOOFER )

• The BASS BOOST controller adjusts the bass enhancement between 0db and +12dB.

• A too high bass boost may cause clipping/distortion and damage on the loudspeakers and also may harm your hearing abilities.

Use this controller carefully!

BASS REMOTE CH3/4 (SUBWOOFER )

• The enclosed BASS REMOTE Controller adjusts the bass-level e.g. from the driver’s seat of the Subwoofer on CH 3/4.

Please use only this enclosed bass remote controller and cable.

TWIN SUB SWITCH

• Select position OFF on the TWIN SUB switch.

FR FL

Connect the stereo RCA output (FL/FR and RL/RR) of the headunit

with LINE INPUTS CH1/2 and CH3/4 of the amplifier

RL RR

Subwoofer

4 – 8 Ohms

Speaker

left

2 – 8 Ohms

Speaker

right

2 – 8 Ohms

Switch position CH1/2 = HP or FULL and CH3/4 = LP/BP

TWIN SUB = OFF

Connect the bass remote

controller and the

remote terminal on the amplifier

with the enclosed cable.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Crunch GTX 2600 Bedienungshandbuch Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Audio-Verstärker Crunch GTX 2600