Crunch GTX 2600 Bedienungshandbuch PDF herunterladen (Seite 19)

Before you start with the installation of the sound system, disconnect by any means the GROUND connection

wire from the battery, to avoid any risk of electric shock and short circuits.

REFERENCE NOTE

INSTALLATION INSTRUCTIONS

MECHANICAL INSTALLATION

Avoid any damage removing of the components of the vehicle like wires, cables, board computer, seat belts, gastank or the like.

Ensure that chosen location provide sufficient air circulation for the amplifier. Do not mount the device into small or sealed spaces without

air circulation near by heat dispersing parts or electrical parts of the vehicle.

Do not mount the amplifier on top of a subwooferbox or any other vibrating parts, thereby parts in the inside of the amplifier may get loosen.

The wires and cables of power supply and the audio signal must be as short as possible, to avoid any losses and interferences.

Amplifier

Mounting

bracket

Mounting

bracket

Vehicle

Pen or

peening

tool

Before mounting the brackets you should remove the

castparts on each end. Then install the 4 supplied mounting

brackets on the bottom side of the amplifier with the supplied

screws. Ensure that the angled side of the brackets are

pointed to the inner side. The pre-drilled screw holes are

located on each corner of the amplifier.

Uphold the amplifier with the mounted brackets to the

chosen mounting location in the vehicle. Then mark the

four drill holes with a appropriate pen or peening tool and

lead through the designated holes of the mounting brackets.

Attend that there remains enough space for the installation

of the cables and ensure that they will not be bended and

have sufficient pull relief.

Put the amplifier aside and then drill the holes for the

mounting screws at the before marked locations. Please

ensure not to damage any components of the vehicle while

drilling the holes. Alternatively (depends on the material of

the surface) you can also use self-tapping screws.

Then uphold the amplifier to the chosen position and fix

the screws through the holes of the mounting brackets into

the drilled screwholes. Ensure that the mounted amplifier

is fixed tight and not get loosen.

Amplifier

Mounting

bracket

Vehicle

Mounting

screws

Amplifier

4 x

Vehicle

Drill

Marking

4 x

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Crunch GTX 2600 Bedienungshandbuch Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Audio-Verstärker Crunch GTX 2600